|
 |
| |
This
is the only system designed to give the user true
factory results in the field!
This user friendly system does not use slurries
or complicated polishing steps and achieves true
Telcordia results in under 2 minutes. Our unique
and proprietary 2 step process meets all of Telcordias’
requirements for endface geometry and environmental
performance. The machine can also resurface badly
damaged connectors eliminating the need to cut and
replace cable.
The kit comes complete with all tools, consumables
and connectors of your choice. Fixtures are available
for SC, ST, FC, LC, and MU type connectors, PC and
APC. Custom fixtures can also be designed and manufactured.
|
| GO
FROM THIS |
TO |
THIS
IN 45 SECONDS |
 |
| |
ACS
II POLISHER SPECIFICATIONS
Power: 12 Volt Battery slide and snap style.
Car
Charger.
110V
AC Adapter.
Fuse: 1.0amp miniature.
Power Consumption : 0.21 Amps/hr.
Connector Heater: 12Volts.
Maximum Heater Temperature: 110 Degrees C.
Time to Maximum Heat: 15 minutes @ 70 degrees
ambient.
Number of Connectors Cured per heat cycle: 4 maximum.
Cure time for Connectors: 3 ~ 5 minutes.
Number of connectors polished per battery charge:
200.
Number of connectors polished per battery charge
using heater: 100.
Battery Charge time: Fast charger: 90 minutes.
Calibration Schedule: None.
Connector Performance Specifications:
UPC: 0.25dB InLoss Max. 58dB Return Loss Min.
APC: 0.25dB InLoss Max. 65dB Return Loss Min.
Connector Types UPC: FC, SC, ST, LC, MU
Connector Types APC: FC, SC
|
| |
|
|
|
MF Lightwave, Inc. • Toll Free: 877-933-9283 • Tampa • Florida 33619
Copyright
2001-2005 - MF Lightwave, Inc. - All Rights Reserved
|
|
